Lasco provides high tech armored vehicles, bodyguard services, air charter services

 

 
Lasco International Group, Protection Services for Work, Home and Travel






 

Click for Printer Friendly Version of this DocumentLasco Home | Armored Vehicles | New Vehicles | 2015 Chevrolet Tahoe

 2015 Chevrolet Tahoe  

Chevrolet Tahoe

Price: $105,750.00
Located in Mexico City
Contact Lasco International Group about this armored vehicle >>

Specifications:

IMMEDIATELY AVAILABLE
2015 Chevrolet Tahoe
Fully Armored in B6 Level of Protection

Basic Vehicle Chassis Specifications:
2015 Chevrolet Tahoe –
1/2-Ton Chassis * 5.3L V8 – Gas Engine – 4x2
320 Horse Power @ 5200 rpm * 340 ft. lbs. of Torque @ 4200 rpm
DVD System
Power Door Locks
4 speed automatic w/overdrive * 7 passenger – front & center row bucket seating
Leather Interior * Air conditioning-front & rear
Adjustable foot pedals
Color: White

Armor Defeat Specifications IAC Level IV / Level NIJ III/ CEN B6:
.357 Magnum (full metal jacket, coned bullet, or soft core), 10.2 g, 425 ms / 158gr. 1450 fps
9mm Luger (full metal jacket, round nose or soft core), 8 g., 381 ms / 124gr. 1250 fps,
.44 Magnum (Full metal jacket, flat nose, or soft core), 15.6 g, 460 ms / 240gr 1510 fps
223 Caliber, 45 gr. / 3,200 fps
(M-16) 5.56 x 45 (full metal jacket, pointed bullet, soft core), 4 g, 950 m/s; 62gr./3116 fps
(AK-47) 7.62 X 39mm, 145 gr., 700mps / 2,430 fps
(AK-47) 7.62 X 39mm, 123 gr., 750 mps / 2,697 fps
308 Winchester, (full metal jacket), 150 gr., 860 mps / 2,800 fps
7.62 x 51mm M80 (full metal copper jacket – steel hard core or soft core), 9.72 g, 860 ms / 150 gr., 2,700 fps

General Specifications:

Transparent Armor (Glass areas): 
Replace the OEM glass in the windshield and all side glass. Glass will be removed and replaced with curved bullet-resistant transparent armor multi-layer glass and polycarbonate inner layer to prevent spalling upon ballistic impact. The transparent armor will be contoured to retain the appearance of the original glass. Rather than curved glass replacing the OEM glass in the rear hatch, which adds a significant amount of weight to the rear hatch; a piece of flat ballistic glass will be mounted in the top-half of the rear compartment just ahead of the rear hatch, which will open to allow access to the rear compartment of the vehicle. This design offers superior ballistic protection and reduces the risk of accidental breakage from the rear hatch slamming down too hard. All glass will be tinted to match OEM tint unless otherwise specified.

Body: 
Doors, pillar posts, side panels, kick-panels, firewall, and headers, cargo area, rear wheel arches, rear cargo doors will all be armored with ballistic steel in accordance with defined standard of defeat. Elitus® overlap system around each window will be used throughout the vehicle to ensure complete protection

Roof: 
Armored with Armormax® ballistic composite material or ballistic steel in accordance with the appropriate standards IAC Level 5 protection at a 45 degree angle of attack. Sunroof if on vehicle will be rendered inoperable.

Floor: 
The floor will be protected by using a blanket of light-weight, multi-ply, laminated, semi-flexible, ballistic fragmentation material (Armormax® PAC100), molded to form fit contours of floorboards and panels. This protection level exceeds a defeat level of a 45-85 gram fragmentation traveling 2,000 fps. German DM51 or US M-67 grenade explosion fragment velocity = 950 fps.

Vehicle Structured Modifications: 
Reinforcement of pillar posts and hinge mounts, high pressure heavy duty shocks, and suspension upgrades as required to maintain original appearance and maneuverability to include: HD torsion bars, HD sway bars, high tension leaf springs and polyurethane bushings as required and as available.

Door Modifications: 
Internal reinforcements will be added to the doors to support the additional armor weight added. Door hinges will be reinforced. Overextension stop-straps will be installed to protect the door hinges from over-extension. Hardened plastic door risers installed on all doors to support closed doors at rest, as required. Access panels for replacing door handles will be included.

Fuel tank: 
Ballistic fragmentation blanket will be applied to fuel tank to suppress potential explosions.

Fuel System: 
Locking Fuel Cap – if required.

Electronic Control Module (ECM) will be armored to protect the engine’s computer.

Battery: 
Original replaced with an Optima® bullet-resistant battery.

Exhaust System: 
Wire mesh tailpipe protection will be added to prevent any objects from being inserted into the tail pipe(s) of the vehicle.

Bumpers: 
Front and rear bumpers will be reinforced (hidden) to allow for “ramming” one’s way out of a boxed in situation.

Wheels and Tires: 
(5) Hutchinson Run flat tire devices will be mounted on “E” rated heavy-duty tires to allow driving even if the tires are deflated.

Operable Window(s): 
Driver side window will operate down to 6 inches to allow external communications, passing of documents at check points, etc.

Siren / Strobe lights / PA System /External Listening System included.

  

 
   
Additional Photos

click to enlarge
drag window to desired location

 

 
 

SiteMapArmored Vehicles | Doors/Windows | Protective Accessories | Protection Services | Armoring Info | Contact Lasco